Carbon Steel Pipe making machine Diameter 114-219 mm Max Speed 50m / min Green Color Tube Mill Machine
Pipe Making Machine production process:
Uncoiler→ Shear&welding machine→ Accumulator (Cage) →Forming machine→ HF welding→ Sizing machine→ Flying saw (Cold saw) → Run out table→hydro testing→end facing for API standard we can equiped online testing equipments, like Hydro testing equipment, End facing equipment, UT testing, ECT testing etc.
Product Introduction:
HG219 High-Frequency Welded Pipe Mill Line is designed to produce round pipe (Diaφ114-219mm, thickness 3-9mm). Adopting roll pass design, the production line can manufacture welded steel pipes with good quality machining and high precision assembling.
Welded Pipe Mill Specifications:
Material Specifications
| Conforming to the YB189-64 standard |
| Material | Low carbon steel and low alloy constructional steel |
| Mechanical properties | σb≤380Mpa,σs≤275MPa |
| strip width | 50～240mm |
| strip thickness | 0.4～2.75mm |
| I.D of Coils | Φ508mm |
| O.D of Coils | φ1800mm |
| Coil Weight | ≤3.0T |
Welded Pipe Specification
| Round Pipe Diameter | 55X55－160X160mm |
| pipe thickness | 0.4-2.75mm |
| Finish pipe length | 4-6m |
| Cut length accuracy | ±2mm |
| Forming speed | 60-120m/min |
Power, Water & Air Supply
| Power | Power Volume of the Line | Approx.600KW |
| Power Source | 380V/60Hz/3phases |
| Circulation Cooling Water | Flow | 20T/h～30 T/h |
| Pool Volume | 30m3 |
| Compressed Air | Flow | 5m3/min |
| Pressure | 5～11kg/ cm2 |
workshop require:
| 6m wide, 70m long, at least 5m high from Ceiling Rails to Ground. |
About Factory:
Our Service
1.) We will send the engineer for the installation and training your workers how to operate this machine in correct way.
2.) Warranty Team
One year quality guarantee, life guarantee repair. Within quality guarantee period, except for failures caused by human error, repair parts will be provided for free. After the quality guarantee period, only charge the cost of the spare parts.
3.) We supply the pre-sell and after-sell service.
pre-sell service: workshop design, and production output design
after-sell service: installation and training, and the skilled engineer for working.
4.) We can also sent the engineer working for you serval months or 1 year. The engineer will help you to improve the output, reduce the waste and decrease the cost.
5.) We supply the pre-sell service-Design for whole project for stainless steel pipe making/ carbon steel pipe making.
6.) We will be responsible for the loading and shipping .
Exhibition
Product Tags:
|
|
Dia 114-219mm Carbon Steel Pipe Making Machine High Performance Tube Mill Machine Images
|
